#!/bin/sh # # Copyright(c) 1998, Space Science and Engineering Center, UW-Madison # Refer to "McIDAS Software Acquisition and Distribution Policies" # in the file mcidas/data/license.txt # # $Id: mcinst.sh,v 1.182 2025/12/23 15:51:09 davep Exp $ # #------- # This is the all-in-one unpack+make+install script for McIDAS-X and # McIDAS-XRD. # # It assumes you have a tar file named foo.tar.Z or foo.tar in the # current directory, where foo is the basename of this script. # # For instance, if this script is called 'mcidas2009.1.sh', then it # assumes there is a file called 'mcidas2009.1.tar.Z' or a file called # 'mcidas2009.1.tar' in the current directory. # # It further assumes that when you unpack the tar file you get a # directory with the same basename. For instance, that you get a # directory named 'mcidas2009.1'. # # This script will also install the -XRD package for McIDAS. # #------- # Set space requirements # # space_kb_x the number of kilobytes of disk space required to unpack # and build McIDAS-X # space_kb_xrd the number of kilobytes of disk space required to unpack # and build McIDAS-XRD #------- space_kb_x=0 space_kb_xrd=0 space_kb_xcd=0 case `uname -s` in AIX) space_kb_x=1000000 space_kb_xrd=400000 ;; Darwin) case `uname -p` in x86_64|i?86) space_kb_x=1082220 space_kb_xrd=422200 space_kb_xcd=1600 ;; arm64|arm) space_kb_x=1087560 space_kb_xrd=425200 space_kb_xcd=1600 ;; powerpc) space_kb_x=980000 space_kb_xrd=390000 ;; esac ;; HP-UX) space_kb_x=1000000 space_kb_xrd=410000 ;; IRIX|IRIX64) space_kb_x=1000000 space_kb_xrd=450000 ;; Linux) case `uname -p` in x86_64) space_kb_x=1032000 space_kb_xrd=424400 space_kb_xcd=1600 ;; i?86) space_kb_x=952000 space_kb_xrd=336000 space_kb_xcd=336000 ;; ppc*) space_kb_x=950000 space_kb_xrd=335000 space_kb_xcd=335000 ;; *) space_kb_x=950000 space_kb_xrd=335000 space_kb_xcd=335000 ;; esac ;; SunOS) case `uname -p` in x86_64|i?86) space_kb_x=860000 space_kb_xrd=356000 ;; sparc) space_kb_x=994000 space_kb_xrd=423000 ;; *) space_kb_x=860000 space_kb_xrd=356000 ;; esac ;; Interix) space_kb_x=441000 space_kb_xrd=390000 ;; CYGWIN*) space_kb_x=310000 space_kb_xrd=310000 ;; esac #------- # dfh() - reports large amounts of free space # # Some OSs with a LOT of free space will fail to report df -k correctly. # dfh will test for GB/TB free before ever falling through to dfk. #------- dfh() # [name] { case $# in 0) set . ;; 1) ;; *) >&2 echo "$0: Usage: $0 [name]" return 1 ;; esac # Some platforms don't support df -h gbtb=0 suff=0 case `uname -s` in IRIX|IRIX64) gbtb=`df -h $1 |tail -1 |awk '{print $5}'` ;; OSF1|Linux|CYGWIN*|Darwin|SunOS) gbtb=`df -h $1 |tail -1 |awk '{print $4}'` ;; esac gb=`echo "$gbtb" |grep "G"` tb=`echo "$gbtb" |grep "T"` if [ -n "$gb" -o -n "$tb" ]; then suff=1 fi echo $suff } #------- # dfk() - reports disk free (in KB) for the filesystem of the given # pathname (defaults to the current directory) # # If filesystem names are long, at least some versions of df will print # the entry for the filesystem on two lines. To allow for this, we # only allow querying one pathname at a time. Given this, once we've # discarded the header line from the df output, all the remaining lines # are the fields for the df report for the pathname. #------- dfk() # [name] { case $# in 0) set . ;; 1) ;; *) >&2 echo "$0: Usage: $0 [name]" return 1 ;; esac case `uname -s` in #------- # AIX 3: # # $ df . # Filesystem Total KB free %used iused %iused Mounted on # /dev/lv02 1814528 575684 68% 52247 11% /home # # AIX 4: # # $ df -k . # Filesystem 1024-blocks Free %Used Iused %Iused Mounted on # /dev/lv00 1843200 237976 88% 71008 16% /home #------- AIX) case `uname -v` in 3) set X `df $1 | sed 1d`; shift ;; 4) set X `df -k $1 | sed 1d`; shift ;; 5) set X `df -k $1 | sed 1d`; shift ;; *) >&2 echo "$0: Unknown AIX '`uname -v`'" return 1 ;; esac case $# in 7) set X $3 $7; shift ;; *) >&2 echo "$0: ERROR: Unexpected df output" return 1 ;; esac ;; #------- # HP-UX: # # $ bdf . # Filesystem kbytes used avail capacity Mounted on # /dev/dsk/c201d6s0 891938 721113 81631 90% / #------- HP-UX) set X `bdf $1 | sed 1d`; shift case $# in 6) set X $4 $6; shift ;; *) >&2 echo "$0: ERROR: Unexpected df output" return 1 ;; esac ;; #------- # IRIX, IRIX64: # # $ df -k . # Filesystem Type kbytes use avail %use Mounted on # /dev/dsk/lv1 efs 1902054 1123917 778137 59% /home # # IRIX64 is 64-bit IRIX. #------- IRIX|IRIX64) set X `df -k $1 | sed 1d`; shift case $# in 7) set X $5 $7; shift ;; *) >&2 echo "$0: ERROR: Unexpected df output" return 1 ;; esac ;; #------- # OSF1, Linux, Cygwin, OS X: # # $ df -k . # Filesystem 1024-blocks Used Avail Capacity Mounted on # /dev/rz3a 63231 33194 23713 58% / #------- OSF1|Linux|CYGWIN*|Darwin) set X `df -k $1 | sed 1d`; shift case $# in 6) set X $4 $6; shift ;; *) >&2 echo "$0: ERROR: Unexpected df output" return 1 ;; esac ;; #------- # Interix: # # $ df -k . # Filesystem 1k-blocks Used Available Capacity Type Mounted on # //HarddiskVolume4 283586556 75529324 208057232 27% ntfs /dev/fs/C #------- Interix) set X `df -k $1 | sed 1d`; shift case $# in 7) set X $4 $7; shift ;; *) >&2 echo "$0: ERROR: Unexpected df output" return 1 ;; esac ;; #------- # SunOS 4: # # $ /usr/bin/df . # Filesystem kbytes used avail capacity Mounted on # /dev/sd3c 1836637 1564841 88133 95% /home # # SunOS 5: # # $ df -k . # Filesystem kbytes used avail capacity Mounted on # /dev/dsk/c0t3d0s3 559598 126069 377579 25% /home #------- SunOS) case `uname -r` in 4.*) set X `/usr/bin/df $1 | sed 1d`; shift ;; 5.*) set X `df -k $1 | sed 1d`; shift ;; *) >&2 echo "$0: Unknown SunOS '`uname -r`'" return 1 ;; esac case $# in 6) set X $4 $6; shift ;; *) >&2 echo "$0: ERROR: Unexpected df output" return 1 ;; esac ;; *) echo "$0: Unknown OS '`uname -s`'" return 1 ;; esac echo $@ # kbfree mountpoint } #------- # checkspace() - exits if the amount of space available is less than the # given number of kilobytes. #------- checkspace() # KBneeded { need_kb="$1" case $need_kb in 0|'') return ;; esac set `dfh .` have_gb="$1" if [ "$have_gb" -ne 1 ] then set `dfk .` have_kb="$1" if [ "$have_kb" -lt "$need_kb" ] then echo "$0: ERROR: Need $need_kb KB of disk space free" echo "$0: Have $have_kb KB" echo "$0: NOTE: Use -s to disable free space checking" exit 1 fi fi } #------- # make sure we are on the right platform #------- case `uname -s` in Windows_NT) echo "This install script is for Unix platforms and Mac OS X only." exit 1 ;; # Interix) echo "This install script is for Unix platforms and Mac OS X only." # exit 1 # ;; *) ;; esac #------- # set the umask so that the tar file will unpack the way it should #------- umask 022 #------- # clean the environment before we try to find mysql #------- unset MySQL_CHECK unset MySQL_ROOT unset MySQL_LIB unset MySQL_INC #------- # record the basename of the script/tarfile/package directory #------- base=`basename $0 .sh` #------- # havetar - nonempty if we have a tar file for this package # tarcmd - the command to use to unpack the tar file # # They are either both empty, or both nonempty. #------- tarcmd= havetar= tarfile=$base.tar tarzfile=$base.tar.Z if [ -f "$tarfile" ] then tarcmd="tar xf $tarfile" havetar=$tarfile elif [ -f "$tarzfile" ] then tarcmd="zcat < $tarzfile | tar xf -" havetar=$tarzfile fi #------- # parse the undocumented options #------- #------- # make: default 'make' command # do_space_check: if nonempty, check for space required to unpack & # build the tar file #------- PATH="`pwd`/${base}/src:$PATH" export PATH # Force the usage of 32bit ar on Interix if [ `uname -s` = "Interix" ]; then PATH=/opt/gcc.3.3/bin:$PATH LD_LIBRARY_PATH=/usr/local/lib:$LD_LIBRARY_PATH export PATH LD_LIBRARY_PATH fi #------- # Set compiler defaults #------- uname_s=`uname -s` # Don't build c++ interfaces # unless explicitly told that cxx compiler works CXX= export CXX F90= export F90 # Tcl/Tk version MCTCLTK=8.4 export MCTCLTK case $uname_s in Linux) gcc=true CC=gcc export CC FC=g77 export FC CPPFLAGS=-Df2cFortran export CPPFLAGS C_COMP=gcc unset F_COMP make="make -j 1 VENDOR=-g77 STRIP=-Wl,-s DEBUG=-O" FOUND_GF=`which gfortran 2>/dev/null` if [ -n "$FOUND_GF" ]; then FC=gfortran export FC make="make -j 1 VENDOR=-gfortran STRIP=-Wl,-s DEBUG=-O" CFLAGS="-DMC_GCC $CFLAGS" export CFLAGS fi ;; CYGWIN*) gcc=true CC=gcc export CC FC=gfortran export FC CPPFLAGS=-Df2cFortran export CPPFLAGS make="make -j 1 VENDOR=-gfortran STRIP=-Wl,-s DEBUG=-O" C_COMP=gcc unset F_COMP CFLAGS='-DMC_FORCE_UNIX' CPP=/usr/bin/cpp CXXCPP=/usr/bin/cpp export CFLAGS CPP CXXCPP ;; Darwin) gcc=true CC=gcc export CC FC=gfortran export FC CPPFLAGS=-Df2cFortran export CPPFLAGS make="make VENDOR=-gfortran STRIP=-Wl,-s DEBUG=-O" C_COMP=gcc unset F_COMP MCTCLTK=8.5 ;; HP-UX) make='make VENDOR=-vendor STRIP=-s DEBUG=-O' CC=cc export CC C_COMP=cc F_COMP=f77 CFLAGS='-Aa -D_HPUX_SOURCE +e' export CFLAGS ver1=`uname -r | sed -e "s/^[A-Z]\.\([0-9]*\)\.[0-9]*$/\1/"` ver2=`uname -r | sed -e "s/^[A-Z]\.[0-9]*\.\([0-9]*\)$/\1/"` if [ "$ver1" -ge 11 ]; then export MCNSL=-lnsl fi if [ "$ver1" -eq 11 -a "$ver2" -ge 11 ]; then F_COMP=f90 fi if [ "$ver1" -gt 11 ]; then F_COMP=f90 fi ;; SunOS) case `uname -p` in i386) # i.e. Solaris x86 CC=gcc export CC FC=g77 export FC make="make VENDOR=-g77 STRIP=-Wl,-s DEBUG=-O" C_COMP=gcc unset F_COMP ;; *) CC=gcc export CC FC=gfortran export FC make="make VENDOR=-gfortran STRIP=-Wl,-s DEBUG=-O" CPPFLAGS=-Df2cFortran export CPPFLAGS C_COMP=gcc unset F_COMP ;; esac ;; IRIX|IRIX64) make='make VENDOR=-vendor STRIP=-s DEBUG=-O' C_COMP=cc F_COMP=f77 CC=cc export CC CFLAGS=-c99 export CFLAGS ;; AIX) make='make VENDOR=-vendor STRIP=-s DEBUG=-O' C_COMP=cc F_COMP=f77 CPPFLAGS=-DNDEBUG export CPPFLAGS CC=cc export CC CFLAGS=-qcpluscmt export CFLAGS ;; Interix) gcc=true CC=gcc export CC FC=g77 export FC CPPFLAGS=-Df2cFortran export CPPFLAGS C_COMP=gcc unset F_COMP make="make" ;; *) make='make VENDOR=-vendor STRIP=-s DEBUG=-O' C_COMP=cc F_COMP=f77 ;; esac do_space_check=true action="link" no_opt= no_x11= no_gui= store_opts= while [ $# -gt 0 ] do store_opts="$store_opts $1" case $1 in -g) make='make STRIP= DEBUG=-g' echo "$0: Building with debug" ;; -s) do_space_check= echo "$0: Skipping free space check" ;; -v) make='make VENDOR=-vendor STRIP=-s DEBUG=-O' unset CC unset FC C_COMP=cc F_COMP=f77 case `uname -s` in HP-UX) CC=cc export CC ver1=`uname -r | sed -e "s/^[A-Z]\.\([0-9]*\)\.[0-9]*$/\1/"` ver2=`uname -r | sed -e "s/^[A-Z]\.[0-9]*\.\([0-9]*\)$/\1/"` if [ "$ver1" -ge 11 ]; then export MCNSL=-lnsl fi if [ "$ver1" -eq 11 -a "$ver2" -ge 11 ]; then F_COMP=f90 fi if [ "$ver1" -gt 11 ]; then F_COMP=f90 fi ;; SunOS) CC=cc export CC ;; IRIX|IRIX64) CC=cc export CC ;; AIX) CC=cc export CC ;; esac ;; -f90) FC=f90 export FC F_COMP=f90 ;; -gfortran) CC=gcc export CC FC=gfortran export FC # ld32 on IRIX64 crashes with segmentation violation if you # pas the -s strip flag to the linker. Don't strip IRIX code if # building with gcc. case `uname -s` in IRIX|IRIX64) make="make VENDOR=-gfortran DEBUG=-O" ;; HP-UX) make='make VENDOR=-gfortran STRIP=-Wl,-s DEBUG=-O' ver1=`uname -r | sed -e "s/^[A-Z]\.\([0-9]*\)\.[0-9]*$/\1/"` if [ "$ver1" -ge 11 ]; then export MCNSL=-lnsl fi CFLAGS='-D_HPUX_SOURCE' ;; *) make="make VENDOR=-gfortran STRIP=-Wl,-s DEBUG=-O" ;; esac C_COMP=gcc unset F_COMP CFLAGS="-DMC_GCC $CFLAGS" export CFLAGS echo "$0: Using GNU gcc + gfortran compilers" ;; -gcc) CC=gcc export CC FC=g77 export FC # ld32 on IRIX64 crashes with segmentation violation if you # pas the -s strip flag to the linker. Don't strip IRIX code if # building with gcc. case `uname -s` in IRIX|IRIX64) make="make VENDOR=-g77 DEBUG=-O" ;; HP-UX) make='make VENDOR=-g77 STRIP=-Wl,-s DEBUG=-O' ver1=`uname -r | sed -e "s/^[A-Z]\.\([0-9]*\)\.[0-9]*$/\1/"` if [ "$ver1" -ge 11 ]; then export MCNSL=-lnsl fi CFLAGS='-D_HPUX_SOURCE' ;; *) make="make VENDOR=-g77 STRIP=-Wl,-s DEBUG=-O" ;; esac C_COMP=gcc unset F_COMP CFLAGS="-DMC_GCC $CFLAGS" export CFLAGS echo "$0: Using GNU gcc + g77 compilers" ;; -f2c) CC=gcc export CC FC=mcfc export FC # ld32 on IRIX64 crashes with segmentation violation if you # pas the -s strip flag to the linker. Don't strip IRIX code if # building with gcc. case `uname -s` in IRIX|IRIX64) make="make VENDOR=-f2c DEBUG=-O" ;; HP-UX) make='make VENDOR=-f2c DEBUG=-O' ver1=`uname -r | sed -e "s/^[A-Z]\.\([0-9]*\)\.[0-9]*$/\1/"` if [ "$ver1" -ge 11 ]; then export MCNSL=-lnsl fi ;; *) make="make VENDOR=-f2c STRIP=-Wl,-s DEBUG=-O" ;; esac C_COMP=gcc unset F_COMP CFLAGS="-DMC_F2C $CFLAGS" export CFLAGS echo "$0: Using GNU gcc compiler and f2c" ;; -c) action="copy" ;; -noopt) no_opt=1 ;; -nox11) no_x11=1 ;; -nogui) no_gui=1 ;; -mysql*)CFLAGS="-DMySQL_INSTALLED $CFLAGS" export CFLAGS MySQL_CHECK=1 MySQL_ROOT=`echo "$1" |awk -F= '{print $2}'` if [ -n "$MySQL_ROOT" ]; then MySQL_LIB="$MySQL_ROOT/lib/mysql" if [ -d $MySQL_ROOT/lib64/mysql ]; then MySQL_LIB="$MySQL_ROOT/lib64/mysql" fi MySQL_INC="$MySQL_ROOT/include/mysql" export MySQL_LIB export MySQL_INC fi # Necessary on Sun for runtime path to be found # -rpath and -R do *not* appear to work as expected! # convdlm needs this if [ `uname -s` = "SunOS" ]; then LD_LIBRARY_PATH=/lib:/usr/lib:/usr/local/lib:$LD_LIBRARY_PATH export LD_LIBRARY_PATH fi ;; -tcl85) MCTCLTK=8.5 ;; -*) echo "$0: ERROR: Illegal argument: $1" exit 1 ;; *) break ;; esac shift done export C_COMP export F_COMP #------- # check for action # # make - unpack things as necessary, do the make # install - install this package (after the make completes) # uninstall - uninstall this package (presumably after installing # it) # unmake - completely remove the package directory, if there's # a tar file left #------- case $1 in dump) echo "# Build environment" echo "CC=${CC}" echo "C_COMP=${C_COMP}" echo "CFLAGS=${CFLAGS}" echo "CPP=${CPP}" echo "CXX=${CXX}" echo "CXXCPP=${CXXCPP}" echo "FC=${FC}" echo "F_COMP=${F_COMP}" echo "MCTCLTK=${MCTCLTK}" exit 0 ;; make) act=make ;; unmake) act=unmake ;; install) act=install ;; uninstall) act=uninstall ;; make-pod) act=make-pod ;; unmake-pod) act=unmake-pod ;; install-pod) act=install-pod ;; uninstall-pod) act=uninstall-pod ;; *) act=error ;; esac #------- # check for package # # x - make/install -X package # xrd - make/install -XRD package #------- package= srcsubdir= case $2 in ''|x) package="McIDAS-X" srcsubdir="src" ;; xrd) package="McIDAS-XRD" srcsubdir="xrd/src" no_opt=1 # Verify that -X has been built if [ ! -f "$base/src/libmcidas.a" ]; then echo "$0: ERROR: McIDAS-X must be built before -XRD" exit 1 fi ;; xcd) package="McIDAS-XCD" srcsubdir="xcd/src" no_opt=1 # Verify that -X has been built if [ ! -f "$base/src/libmcidas.a" ]; then echo "$0: ERROR: McIDAS-X must be built before -XCD" exit 1 fi ;; all) package="ALL" ;; *) act=error ;; esac if [ "$act" = "error" ]; then cat </dev/null` if [ "$McIDAS" = "/" ]; then McIDAS= fi else McIDAS=`sed -n "/^mcidas:/ s,.*:\([^:]*\):[^:]*$,\1,p" /etc/passwd` case $McIDAS in /*) ;; *) McIDAS=`csh -f -c "echo ~mcidas" 2>/dev/null` ;; esac fi #------- # Set 'who' to 'mcidas' if we are installing this package in the mcidas # account. # # It's empty if we are installing in any other account. # # Make sure we are not root while we're at it. #------- ID=`id` MC_USER=`echo "$ID" |sed -e 's/(/ /g' -e 's/)/ /g' |awk '{print $2}'` MC_GROUP=`echo "$ID" |sed -e 's/(/ /g' -e 's/)/ /g' |awk '{print $4}'` export MC_USER export MC_GROUP case "$ID" in 'uid=0('*) echo "$0: ERROR: Cannot run as root" exit 1 ;; uid=?"(mcidas)"* |\ uid=??"(mcidas)"* |\ uid=???"(mcidas)"* |\ uid=????"(mcidas)"* |\ uid=?????"(mcidas)"* |\ uid=??????"(mcidas)"* |\ uid=???????"(mcidas)"* |\ uid=?"("*"+mcidas)"* |\ uid=??"("*"+mcidas)"* |\ uid=???"("*"+mcidas)"* |\ uid=????"("*"+mcidas)"* |\ uid=?????"("*"+mcidas)"* |\ uid=??????"("*"+mcidas)"* |\ uid=???????"("*"+mcidas)"* ) who=mcidas ;; *) if [ -z "$(echo $act |grep "\-pod$")" ]; then echo "$0: WARNING: Using individual account instead of mcidas account" fi who= ;; esac #------- # be paranoid about possibly nuking ourselves with tar #------- case $0 in *.sh) ;; *) echo "$0: ERROR: Script name must end in .sh to avoid conflicts" exit 1 ;; esac #------- # set environment variables for the make # # McIDAS_ROOT - where to find pre-installed stuff: # ~mcidas if it's installed in the mcidas acct # `pwd`/mcidas if it's installed in this acct # McINST_ROOT - where to install this package # ~mcidas if it's installed in the mcidas acct # `pwd`/mcidas if it's installed in this acct # McINC_ROOT - where to look for incremental upgrade candidates # ~mcidas if it's installed in the mcidas acct # `pwd` if it's installed in this acct # # We need to check for whether the mcidas home directory exists, and # whether we are installing in the mcidas account or somewhere else. #------- export McIDAS_ROOT export McINST_ROOT export McINC_ROOT export MySQL_CHECK if [ -d "$McIDAS" ] then # the home directory of the mcidas account exists case $who in mcidas) # installing in the mcidas account McIDAS_ROOT=$McIDAS McINST_ROOT=$McIDAS McINC_ROOT=$McIDAS ;; *) # installing in personal account McIDAS_ROOT=$McIDAS McINST_ROOT=`pwd`/mcidas McINC_ROOT=`pwd` ;; esac else # the home directory of the mcidas account does NOT exist case $who in mcidas) # installing in the mcidas account echo "$0: ERROR: User 'mcidas' has no home directory" exit 1 ;; *) # installing in personal account # (any previously required mcidas software had # better also be there) McIDAS_ROOT=`pwd`/mcidas McINST_ROOT=`pwd`/mcidas McINC_ROOT=`pwd` ;; esac fi #------- # Preemptively capture all the podman-related stuff #------- if [ -n "$(echo $act |grep "\-pod$")" ]; then if [ `uname -s` != "Darwin" ]; then echo "$0: ERROR: Podman is only supported on macOS" exit 1 fi # Configure McX_VERSION=$(basename $0 .sh |sed -e 's/^mcidas//') McX_CLEAN=$(echo ${McX_VERSION} |sed -e 's/\./-/g') ROCKY_NAME="rockylinux:9" IMAGE_NAME="mcidas-x-${McX_CLEAN}" CONTAINER_NAME="mcidas-x-${McX_CLEAN}" DOCKERFILE="Dockerfile.mcidas-x-${McX_CLEAN}" echo echo "Checking prerequisites..." printf "%-12s" " Podman: " PODMAN=$(which podman |grep -v "not found") if [ -z "${PODMAN}" ]; then echo "Not found" echo " Please visit https://podman.io install" exit 1 else echo "OK" fi printf "%-12s" " Homebrew: " BREW=$(which brew |grep -v "not found") if [ -z "${BREW}" ]; then echo "Not found" echo " Please visit https://brew.sh to install" exit 1 else echo "OK" fi printf "%-12s" " socat: " SOCAT=$(which socat |grep -v "not found") if [ -z "${SOCAT}" ]; then echo "Not found" echo " Please run \"brew install socat\" to install" exit 1 else echo "OK" fi # Inspect IMAGE_EXISTS=0 ${PODMAN} image exists ${CONTAINER_NAME} if [ $? -eq 0 ]; then IMAGE_EXISTS=1 fi CONTAINER_EXISTS=0 CONTAINER_STATUS=undefined ${PODMAN} container exists ${CONTAINER_NAME} if [ $? -eq 0 ]; then CONTAINER_EXISTS=1 CONTAINER_STATUS=$(${PODMAN} container inspect -f '{{.State.Status}}' ${CONTAINER_NAME}) fi SOCAT_PORT=6000 SOCAT_PID=$(ps -efw |grep socat | grep ":${SOCAT_PORT}" |awk '{print $2}') echo fi case $act in make-pod) McPOD_ROOT=${McINST_ROOT}/podman if [ ${IMAGE_EXISTS} -eq 1 ]; then echo "Warning: Image \"${IMAGE_NAME}\" already exists" exit 1 fi if [ ! -f "mcidas${McX_VERSION}.tar.Z" -o ! -f "mcidas${McX_VERSION}.sh" ]; then echo "Error: Missing McIDAS-X installation file(s)" echo " mcidas${McX_VERSION}.sh" echo " mcidas${McX_VERSION}.tar.Z" exit 1 fi McPOD_DISKREQUIRED=$((14*1024*1024*1024)) McPOD_DISKBYTES=$(${PODMAN} machine list --format json |jq -r '.[0].DiskSize') if [ -z "${McPOD_DISKBYTES}" -o "${McPOD_DISKBYTES}" = "null" ]; then echo "Error: Unable to get Podman machine disk size" exit 1 elif [ ${McPOD_DISKBYTES} -lt ${McPOD_DISKREQUIRED} ]; then echo "Error: Podman machine disk size is too small" exit 1 fi DOCKERFILE_BASE64="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" echo "Working in directory ${McPOD_ROOT}" mkdir -p ${McPOD_ROOT} if [ ! -f ${McPOD_ROOT}/mcidas${McX_VERSION}.sh ]; then ln mcidas${McX_VERSION}.sh ${McPOD_ROOT}/. fi if [ ! -f ${McPOD_ROOT}/mcidas${McX_VERSION}.tar.Z ]; then ln mcidas${McX_VERSION}.tar.Z ${McPOD_ROOT}/. fi cd ${McPOD_ROOT} echo "Pulling image \"${ROCKY_NAME}\"" ${PODMAN} image pull ${ROCKY_NAME} if [ $? -ne 0 ]; then echo "Error: Unable to pull Podman image: ${ROCKY_NAME}" exit 1 fi echo "${DOCKERFILE_BASE64}" |base64 -d >${DOCKERFILE} sed -i '' "s/\[VERSION\]/${McX_VERSION}/g" ${DOCKERFILE} echo "Building image \"${IMAGE_NAME}\"" ${PODMAN} image build --file ${DOCKERFILE} --tag ${IMAGE_NAME} --build-arg USER if [ $? -ne 0 ]; then echo "Error: Unable to build Podman image: ${IMAGE_NAME}" exit 1 fi echo echo "$0: $package make-pod completed normally." echo exit 0 ;; unmake-pod) McPOD_ROOT=${McINST_ROOT}/podman echo "Working in directory ${McPOD_ROOT}" if [ ${IMAGE_EXISTS} -eq 1 ]; then echo "Removing image \"${IMAGE_NAME}\"" ${PODMAN} image rm ${CONTAINER_NAME} >/dev/null if [ $? -ne 0 ]; then echo "Warning: Unable to rm Podman container: ${CONTAINER_NAME}" fi fi rm -f ${McPOD_ROOT}/Dockerfile.mcidas-x rm -f ${McPOD_ROOT}/mcidas${McX_VERSION}.sh rm -f ${McPOD_ROOT}/mcidas${McX_VERSION}.tar.Z echo echo "$0: $package unmake-pod completed normally." echo exit 0 ;; install-pod) McBIN_ROOT=${McINST_ROOT}/bin McDATA_ROOT=${McINST_ROOT}/data echo "Creating directories..." echo " ${McBIN_ROOT}" mkdir -p ${McBIN_ROOT} echo " ${McDATA_ROOT}" mkdir -p ${McDATA_ROOT} MCRC=${HOME}/.mcidasrc if [ ! -f ${MCRC} ]; then cat <${MCRC} -f 10@480x640 -c '!@exec mccheck' -c 'SKED SKEDFILE' -c GUI -font '9x15bold' -ih 100 -oh 1000 -tcolbg0 'black' -tcolbg96 'yellow4' -tcolfg7 'grey80' -tcolfg10 'green' -tcolfg11 'cyan' -tcolfg13 'magenta' -tcolfg14 'yellow' -tgeometry 85x26+300+400 -igeometry +5+5 -graphicsColors 16 -imageColors 128 -optimizeForSpeed -manualResize -config EOF fi # See if a classic McX script already exists if [ -f ${McBIN_ROOT}/mcidas ]; then if [ $(wc -l ${McBIN_ROOT}/mcidas |awk '{print $1}') -gt 512 ]; then McX_SAVE="mcidas.$(date +%Y%m%d_%H%M%S)" echo echo "Renaming existing \"mcidas\" script to \"${McX_SAVE}\"" mv ${McBIN_ROOT}/mcidas ${McBIN_ROOT}/${McX_SAVE} fi fi if [ ! -f ${McBIN_ROOT}/mcidas ]; then cat <${McBIN_ROOT}/mcidas #!/bin/sh # # McIDAS-X Podman wrapper script # Created by "install-pod" action echo echo "McIDAS-X Podman wrapper script for macOS" echo CONTAINER_NAME="${CONTAINER_NAME}" IMAGE_NAME="${IMAGE_NAME}" SOCAT_PORT=${SOCAT_PORT} # Check our DISPLAY if [ -z "\${DISPLAY}" ]; then echo "Error: DISPLAY is not set" exit 1 fi if [ ! -S \${DISPLAY} ]; then echo "Error: DISPLAY is not a socket" exit 1 fi # Get our IP HOST_IP=\$(ifconfig |grep broadcast |\\ grep "inet [0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]* " |\\ awk '{print \$2}' |\\ head -1) # Get container status ${PODMAN} container exists \${CONTAINER_NAME} if [ \$? -ne 0 ]; then echo "Creating container \${CONTAINER_NAME}" ${PODMAN} container create --name=\${CONTAINER_NAME} -it -v ${MCRC}:/home/\${USER}/.mcidasrc:z -v ${McDATA_ROOT}:/home/\${USER}/mcidas/data:z \${IMAGE_NAME} fi CONTAINER_STATUS=\$(${PODMAN} container inspect -f '{{.State.Status}}' \${CONTAINER_NAME}) # Get status of the target container if [ "\${CONTAINER_STATUS}" != "running" ]; then echo "Starting container \${CONTAINER_NAME}" ${PODMAN} container start \${CONTAINER_NAME} fi # Kill socat if it is running on another display pgrep -q socat && pgrep -fq "socat.*\${DISPLAY}" || killall socat # Forward host port \${SOCAT_PORT} to unix DISPLAY socket nc -vz localhost \${SOCAT_PORT} 2>/dev/null if [ \$? -ne 0 ]; then echo "Starting socat to allow DISPLAY connection" echo " Host IP: \${HOST_IP}" echo " Host Port: \${SOCAT_PORT}" ${SOCAT} TCP4-LISTEN:\${SOCAT_PORT},reuseaddr,fork,range=\${HOST_IP}/0 UNIX-CLIENT:\"\${DISPLAY}\" & fi # Exec mcidas echo "Starting McIDAS-X in container \\"\${CONTAINER_NAME}\\"" MC_ARGS=\$@ ${PODMAN} container exec -e DISPLAY=\${HOST_IP}:0 \${CONTAINER_NAME} bash -l -c "mcidas \${MC_ARGS}" EOF chmod 755 ${McBIN_ROOT}/mcidas fi echo echo "Run \"${McBIN_ROOT}/mcidas\" to start McIDAS-X" echo echo "$0: $package install-pod completed normally." echo exit 0 ;; uninstall-pod) McBIN_ROOT=${McINST_ROOT}/bin if [ -n "${SOCAT_PID}" ]; then echo "Stopping socat port forwarding for X11" kill ${SOCAT_PID} 2>/dev/null fi echo "Removing container \"${CONTAINER_NAME}\"" ${PODMAN} container stop ${CONTAINER_NAME} >/dev/null 2>&1 if [ $? -ne 0 ]; then echo "Warning: Unable to stop Podman container: ${CONTAINER_NAME}" fi ${PODMAN} container rm ${CONTAINER_NAME} >/dev/null 2>&1 if [ $? -ne 0 ]; then echo "Warning: Unable to rm Podman container: ${CONTAINER_NAME}" fi echo "Removing ${McBIN_ROOT}/mcidas" rm -f ${McBIN_ROOT}/mcidas echo echo "$0: $package uninstall-pod completed normally." echo exit 0 ;; esac #------- # Set space_kb to the appropriate value based on which package we are building #------- space_kb=0 if [ "$package" = "McIDAS-X" ]; then space_kb=$space_kb_x elif [ "$package" = "McIDAS-XRD" ]; then space_kb=$space_kb_xrd elif [ "$package" = "McIDAS-XCD" ]; then space_kb=$space_kb_xcd elif [ "$package" = "ALL" ]; then space_kb=`expr "$space_kb_x" + "$space_kb_xrd" + "$space_kb_xcd"` fi if [ -n "$do_space_check" -a $space_kb -eq 0 ] then echo "$0: ERROR: Unrecognized platform, did not set space_kb" echo "$0: To skip this check, use the -s build option" exit 1 fi #------- # if package=ALL build each package in order #------- if [ "$package" = "ALL" ] then if [ -n "$do_space_check" ] then checkspace "$space_kb" fi if [ "$act" = "unmake" -o "$act" = "uninstall" ] then sh $0 $store_opts xrd && \ sh $0 $store_opts x else sh $0 $store_opts x && \ sh $0 $store_opts xrd fi exit 0 fi #------- # set LD_LIBRARY_PATH if it looks like it might be needed #------- if [ -f /usr/local/lib/libgcc_s.so.1 ]; then # Do NOT do this on SunOS where we prefer /opt/csw for gcc if [ `uname -s` != "SunOS" ]; then LD_LIBRARY_PATH=/usr/local/lib:${LD_LIBRARY_PATH} export LD_LIBRARY_PATH fi fi #------- # disable optimization if requested #------- if [ -n "$no_opt" ]; then make=`echo "$make" | sed -e 's/ DEBUG=-O//'` make="$make NOOPT=-noopt" echo "$0: Disabling optimizations" fi #------- # notify the user of the Tcl/Tk version being used #------- echo "$0: Using Tcl/Tk version $MCTCLTK" #------- # disable X11 if requested #------- if [ -n "$no_x11" ]; then echo "$0: Building without X11 support" fi #------- # disable GUI if requested #------- if [ -n "$no_gui" ]; then echo "$0: Building without GUI support" fi #------- # notify the user that we will look for MySQL #------- if [ -n "$MySQL_CHECK" ]; then if [ -n "$MySQL_ROOT" ]; then echo "$0: Building with MySQL support from $MySQL_ROOT" else echo "$0: Building with MySQL support" fi fi #------- # if doing a make check if compilers are present #------- if [ "$act" = "make" ]; then #check for C compiler if [ -n "${C_COMP}" ]; then type ${C_COMP} >/dev/null 2>&1 if [ $? -ne 0 ]; then echo "$0: ERROR: ${C_COMP} compiler not found in PATH" exit 1 fi fi #check for fortran compiler if [ -n "${F_COMP}" ]; then type ${F_COMP} >/dev/null 2>&1 if [ $? -ne 0 ]; then echo "$0: ERROR: ${F_COMP} compiler not found in PATH" exit 1 fi fi #check for X11 if [ ! -d "/usr/X11R6" -a ! -d "/usr/lib/X11" -a ! -d "/usr/lib64/X11" -a ! -d "/opt/homebrew/lib" ]; then echo "$0: WARNING: could not locate X11. Continue [y/n]?" read CONTYN case $CONTYN in y*) ;; *) exit 1 ;; esac fi fi #------- # Check that $McINST_ROOT directories are okay, and create # them if necessary. # # NOTE: The "src" directory is for backward compatibility, # and is currently used only by the HELP command. #------- exit=0 dir_list=" $McINST_ROOT \ $McINST_ROOT/bin \ $McINST_ROOT/data \ $McINST_ROOT/help \ $McINST_ROOT/inc \ $McINST_ROOT/lib \ $McINST_ROOT/src \ $McINST_ROOT/man \ $McINST_ROOT/man/man3 \ $McINST_ROOT/lib/gui \ $McINST_ROOT/tcl" for v in $dir_list do if [ ! -d "$v" ] then echo "$0: making directory $v" if mkdir $v then : else echo "$0: ERROR in making directory $v" exit=1 fi fi done case $exit in 1) echo "$0: Cannot make required directories." exit $exit ;; esac #------- # dir - the root directory of the package distribution # # If it doesn't exist, try to create it using the tar file. # If we don't have a tar file, we're stuck. #------- dir=$base if [ ! -d "$dir" ] then case $havetar in '') echo "$0: ERROR: Cannot find '$tarfile' or '$tarzfile'" exit 1 ;; esac if [ ! -w . ] then echo "$0: ERROR: No permission to write into the current directory" exit 1 fi if [ -n "$do_space_check" ] then checkspace "$space_kb" fi echo "$0: Unpacking $havetar" eval $tarcmd if [ ! -d "$dir" ] then echo "$0: ERROR: Cannot unpack tar file!" exit 1 fi fi # By here, we must have the directory, or we can't go on. if [ ! -d "$dir" ] then echo "$0: ERROR: Cannot find package directory!" exit 1 fi #------- # srcdir - the source directory of the package distribution # This is where the top-level makefile lives. #------- srcdir="$dir/$srcsubdir" if [ ! -d "$srcdir" ] then echo "$0: ERROR: Cannot find source directory!" exit 1 fi # Look for a platform-specific makefile mf_specific=makefile.`uname -sm |sed -e 's/ /_/'` if [ -f "$srcdir/$mf_specific" ] then if [ ! -f $srcdir/makefile.core ] then cp $srcdir/makefile $srcdir/makefile.core fi echo "$0: using platform-specific makefile: $mf_specific" cp $srcdir/$mf_specific $srcdir/makefile fi if [ ! -f "$srcdir/makefile" ] then echo "$0: ERROR: Package lacks a makefile!" exit 1 fi # record current directory, just in case pwd=`pwd` # cd to the source directory if cd $srcdir then : else echo "$0: ERROR: Cannot cd to '$srcdir'" exit 1 fi case $act in make) # Do the build. # The 'make clean' removes intermediate generated files # that we don't need in order to do the install. # This is to save space. if [ -n "$do_space_check" ] then checkspace "$space_kb" fi # Fix Solaris+GCC problem with HDF5 if [ "$package" = "McIDAS-X" -a `uname -s` = "SunOS" ]; then SMFI="../hdf5/src/Makefile.in" HASH5D=`grep "^H5detect.o" ${SMFI}` if [ -z "$HASH5D" ]; then echo "" >> ${SMFI} echo "H5detect.o:" >> ${SMFI} printf "\tgcc -c H5detect.c\n" >> ${SMFI} fi fi # Link to the requested Tcl/Tk version if [ "$package" = "McIDAS-X" ] then cd .. # Check for already linked Tcl/Tk versions if [ -L tcl -o -L tk ]; then TCLTARG=$(readlink tcl) TCLVER=$(echo ${TCLTARG} |sed -e 's/tcl//') TKTARG=$(readlink tk) TKVER=$(echo ${TKTARG} |sed -e 's/tk//') if [ ${TCLVER} != ${TKVER} ]; then echo "$0: ERROR: Tcl/Tk version mismatch (${TCLVER} vs ${TKVER})" exit 1 fi if [ ${TCLVER} != ${MCTCLTK} -o ${TKVER} != ${MCTCLTK} ]; then echo "$0: ERROR: Tcl/Tk version mismatch (${TCLVER} installed)" exit 1 fi fi rm -f tcl && ln -s tcl${MCTCLTK} tcl rm -f tk && ln -s tk${MCTCLTK} tk cd $srcsubdir fi if [ -z "$no_x11" -a -z "$no_gui" ]; then if eval $make all then : else echo "$0: ERROR: 'make all' failed" exit 1 fi elif [ -n "$no_x11" ]; then if eval $make all.nox then : else echo "$0: ERROR: 'make all.nox' failed" exit 1 fi else if eval $make all.nogui then : else echo "$0: ERROR: 'make all.nogui' failed" exit 1 fi fi if eval $make -n clean then : else echo "$0: ERROR: 'make clean' failed" exit 1 fi # If we get to here everything is fine. echo echo "$0: $package make completed normally." echo ;; unmake) # Undo the build. if eval $make clobber then : else echo "$0: ERROR: 'make clobber' failed" exit 1 fi if cd $pwd then : else echo "$0: ERROR: Cannot cd to '$pwd'" exit 1 fi # Only remove dirs if unmaking McIDAS-X if [ "$package" = "McIDAS-X" ] then # Remove the Tcl/Tk links rm -f $dir/tcl rm -f $dir/tk case $havetar in ?*) if rm -rf $dir then : else echo "$0: ERROR: 'rm -rf $dir' failed" exit 1 fi ;; *) echo echo "$0: WARNING: No tar file, so not removing $dir" ;; esac fi # If we get to here everything is fine. echo echo "$0: $package unmake completed normally." echo ;; install) # Do the install. if [ -z "$no_x11" -a -z "$no_gui" ]; then if eval $make install.all then : else echo "$0: ERROR: 'make install.all' failed" exit 1 fi elif [ -n "$no_x11" ]; then if eval $make install.all.nox then : else echo "$0: ERROR: 'make install.all.nox' failed" exit 1 fi else if eval $make install.all.nogui then : else echo "$0: ERROR: 'make install.all.nogui' failed" exit 1 fi fi # Install binary mcwish and required dylib for OS X compatibility # For 2010.2: No longer use binary mcwish, but might want this back in the future # uname_s=`uname -s` # uname_m=`uname -m` # if [ "$package" = "McIDAS-X" -a \ # "$uname_s" = "Darwin" -a \ # "$uname_m" = "i386" ]; then # # rm -f $McINST_ROOT/bin/libgfortran.3.dylib >/dev/null 2>&1 # cp ./libgfortran.3.dylib \ # $McINST_ROOT/bin/. >/dev/null 2>&1 && \ # chmod 755 $McINST_ROOT/bin/libgfortran.3.dylib # # rm -f $McINST_ROOT/bin/mcwish >/dev/null 2>&1 # cp ./mcwish.osx \ # $McINST_ROOT/bin/mcwish >/dev/null 2>&1 && \ # chmod 755 $McINST_ROOT/bin/mcwish # # diff ./libgfortran.3.dylib \ # $McINST_ROOT/bin/libgfortran.3.dylib >/dev/null 2>&1 # DIFF1=$? # diff ./mcwish.osx \ # $McINST_ROOT/bin/mcwish >/dev/null 2>&1 # DIFF2=$? # if [ $DIFF1 -ne 0 -o $DIFF2 -ne 0 ]; then # echo "$0: ERROR: Installing OS X mcwish binary failed" # exit 1 # fi # # else # rm -f ./mcwish.osx >/dev/null 2>&1 # rm -f ./libgfortran.3.dylib >/dev/null 2>&1 # fi # If we get to here everything is fine. echo echo "$0: $package install completed normally." echo ;; uninstall) # Do the uninstall. if [ -z "$no_x11" -a -z "$no_gui" ]; then if eval $make uninstall.all then : else echo "$0: ERROR: 'make uninstall.all' failed" exit 1 fi elif [ -n "$no_x11" ]; then if eval $make uninstall.all.nox then : else echo "$0: ERROR: 'make uninstall.all.nox' failed" exit 1 fi else if eval $make uninstall.all.nogui then : else echo "$0: ERROR: 'make uninstall.all.nogui' failed" exit 1 fi fi # If we get to here everything is fine. echo echo "$0: $package uninstall completed normally." echo ;; esac exit 0 ######################################################################